Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching

$499.00

Specification: Build Volume: 300×300×400mm Layer Resolution: 0.1mm-0.35mm Print Speed: 60mm/s-150mm/s Travel Speed: 250mm/s Print Surface: Glass-ceramic Heat Bed Type: AC heat bed Number of Extruders: 1 Filament Diameter: 1.75mm Supported Filament Materials: PLA.ABS.Flexible PLA.Wood.PVA.HIPS Frame: Aluminum Calibration: Automatic Bed Leveling Extruder: Titan Direct Drive Extruder XYZ Resolution: 0.05mm,0.05mm,0.1mm Nozzle Type: Volcano Nozzle Diameter: 0.4mm Nozzle Temperature: 180ºC-240ºC Nozzle Heat Up Time: <3 minutes Build Plate Heat Up Time: 80C inless than 2 minutes Operating Sound: <70dBA Power Consumption: 100-240V 700W max(w/heated bed turned on) Contorl Board: Artillery Ruby 32 Bit  Product Weight: 12.9KG Shipping Weight: 16KG Product Dimensions: 550×405×640mm Shipping Box: 668×508×310mm Maximum Build Plate Temperature: 130ºC Connectivity: USB,TF Card,USB Stick Special Features: 1. Exclusive Ultra-Quiet Stepper Driver 2. Synchronized Dual Z-Axis System 3. Direct Drive Extruder 4. Filament Runout Detection and Recovery 5. Power Loss Detection and Recovery 6. Rapid Heating AC Heat Bed 7. Touch Screen Control

SKU: 734257619653 Category: Tag:

Description

Brand: Artillery

Features:

  • The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be.
  • The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
  • There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.
  • SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money.
  • With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X2 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds.

Details: Specification:
Build Volume: 300×300×400mm
Layer Resolution: 0.1mm-0.35mm
Print Speed: 60mm/s-150mm/s
Travel Speed: 250mm/s
Print Surface: Glass-ceramic
Heat Bed Type: AC heat bed
Number of Extruders: 1
Filament Diameter: 1.75mm
Supported Filament Materials: PLA.ABS.Flexible PLA.Wood.PVA.HIPS
Frame: Aluminum
Calibration: Automatic Bed Leveling
Extruder: Titan Direct Drive Extruder
XYZ Resolution: 0.05mm,0.05mm,0.1mm
Nozzle Type: Volcano
Nozzle Diameter: 0.4mm
Nozzle Temperature: 180ºC-240ºC
Nozzle Heat Up Time: