One Man Earth Auger – 71cc 4HP Petro Post Hole Borer Ground Drill Gas Powered Post Hole Digger Full Crankshaft Engine +3 Bit 4″ 6″ 8″ + Extension

$299.00

Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bits : 4″, 6″ and 8″ Bit length : 31″ Safety: Bit Lock Power:3.2kw Carburetor with pump Easy starting system (cord starter). Centrifugal clutch Change bits quickly and easily Weight : 10.85 Kg. (without bit) Accessories: 3 bits:4″, 6″ and 8″ Extension Bar: 12″ Fuel Mixing Bottle Toolkit for assembly Start steps: 1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you deadlift) 2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better 3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper。 Notice: Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again.

SKU: 738627786297 Category: Tags: ,

Description

Brand: NG NOPTEG

Color: Orange and black

Features:

  • √The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. With this tool, you will be able to perform professional quality work.
  • √The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
  • √Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
  • √Ergonomically designed, it is accurate, easy to use and economical.
  • √Supplied with bits of 4″, 6″ & 8″, the auger can drill holes of various diameters.

Details: Technical Details:
Engine: Single Cylinder, 2-stroke, air-cooled
Cylinder capacity : 71cc
Fuel mix: 25/1
Bits : 4″, 6″ and 8″
Bit length : 31″
Safety: Bit Lock
Power:3.2kw
Carburetor with pump
Easy starting system (cord starter). Centrifugal clutch
Change bits quickly and easily
Weight : 10.85 Kg. (without bit)

Accessories:
3 bits:4″, 6″ and 8″
Extension Bar: 12″
Fuel Mixing Bottle
Toolkit for assembly

Start steps: 1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you deadlift) 2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better 3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper。
Notice: Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again.

UPC: 738627786297