Skil 10″ Dual Bevel Sliding Miter Saw – MS6305-00 & WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets

$347.32

Skil 10″ Dual Bevel Sliding Miter Saw – MS6305-00 The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles. The tool comes equipped with a cam miter lock knob for repeatable accuracy, durability, and easy adjustments, while the tall sliding fences support 4-1/2” base molding vertically, and 6-1/4” crown molding vertically nested. The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability. The quick work clamp quickly secures materials for safer cutting. WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets Remember when you could adequately support both your miter saw and your work piece? With the WEN Collapsible Rolling Miter Saw Stand, you’ll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stand’s body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because it’s a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Category: Tag:

Description

Brand: Skil

Features:

  • Product 1: POWERFUL 15 AMP MOTOR – Delivers 4,800 RPM for quick, detailed cuts
  • Product 1: DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right
  • Product 1: LED SHADOW LINE – Provides high precision cuts with greater accuracy than lasers
  • Product 1: 2×12 CUTTING CAPACITY – Cross cuts lumber up to 2×12 at 90 degrees, and 2×8 lumber at 45 degrees
  • Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws
  • Product 2: Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
  • Product 2: Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
  • Product 2: Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long

Details: Skil 10″ Dual Bevel Sliding Miter Saw – MS6305-00
The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles. The tool comes equipped with a cam miter lock knob for repeatable accuracy, durability, and easy adjustments, while the tall sliding fences support 4-1/2” base molding vertically, and 6-1/4” crown molding vertically nested. The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability. The quick work clamp quickly secures materials for safer cutting.

WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets
Remember when you could adequately support both your miter saw and your work piece? With the WEN Collapsible Rolling Miter Saw Stand, you’ll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stand’s body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because it’s a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.