YONG HENG 4500PSI Compressor,Electric 110V 30MPa 4500 PSI PCP Air Compressor Pump,Set Pressure High Pressure Air Compressor for Airgun Scuba Rifle,Perfect For filling PCP Air Rifle

$295.90

This YONG HENG compressor is the ideal solution for inflation problems.With the function of automatic stop after reaching the set pressure, you can set any pressure from under 4500 PSI.It is widely be used for breathing of diving and fire fighting, paintball PC Pshooting and other high pressure industries. Specifications: Voltage: 110V Power: 1.80KW Filling Time: 1L/ 7 minutes Working Pressure: 100-300BAR; 1500-4500PSI Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM Compression Stage : Two Stage Lubrication Mode : Splash Type Material of Cover : Cast Aluminum Inflating Speed: 2800 R/MIN Noise : MAX 85DB Cooling System: Water Cooling Shout down : Manual stop/automatic stop(for optional) Pressure indicate : Gauge Filtration : Water/oil separator Lubricating oil : ISO VG46 or AW 46 Air hose connection : 8mm quick connect fitting Attention: 1. Make sure the voltage in nameplate meets local powersupply. 2. Double Check the lubricant has been put in before running. 3. Make sure your socket can withstand over 8A electric current, or the circuit may get burnt. 4. Make sure the pressure setting is under 4500psi(310bar). 5. The machine will auto shut off once the pressure reaches 30MPA / 300bar. 6. To keep the cylinder stator temperature in control, please change the cooling water every 30 minutes. 7. Regularly check the engine oil and make sure oil level stays above the red dot; change engine oil if oil color turns. 9. Please make sure to use the ISO VG46 & AW46 standard oil. 10.Before starting the compressor, be sure to replace the breather rod in the kit Package Content: Compressor Pump x 1 Hose Female x 1 Air Cock x 1 Water Pump x 1 Wearing Parts x 1 Water Pipe x 2 Pressure Relief Screw x 2 English Manua

SKU: 723496766310 Category: Tag:

Description

Brand: PRIBCHO

Features:

  • Set Pressure: With the function of automatic stop after reaching the set pressure, you can set any pressure under 4500 PSI, and the pump will stop automatically when the pressure reaches the pre-set level. This way you don’t have to worry about damaging the machine due to excessive pressure and don’t have to keep an eye on the machine. You only need to set the pressure once, and then each time you inflate it will be faster and safer.
  • Outstanding quality:Compact PCP Air Compressor,It takes only 30 minutes to fill full 6.8L tank to 300BAR, Which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles. Made of alloy air cylinder and high-quality components ensure years of use. Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, perfect for air impermeability test
  • Auto-Shutoff:A single working time cannot exceed 30 minutes, the machine temperature cannot exceed 80 degrees Celsius.If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot, automatic shutdown is a normal phenomenon, have a rest after a few minutes the temperature can return to normal, then start again.
  • Wide application:A universal fast connection and charging connector is accompanied with the 4500 PSI air compressor, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Range of application For fire fighting, diving, leakage detecting, pressure-tight test, air pistols, etc.
  • 100% MONEY BACK GUARANTEE: This Yong Heng compressor equiped with pure copper motor,which ensures a longer service life. We provide One Year warranty,100% Satisfaction Guarantee.Any problems about this product will be given best solution in 24 hours, please don’t hesitate to contact us at any time.

Details: This YONG HENG compressor is the ideal solution for inflation problems.With the function of automatic stop after reaching the set pressure, you can set any pressure from under 4500 PSI.It is widely be used for breathing of diving and fire fighting, paintball PC Pshooting and other high pressure industries.
Specifications:
Voltage: 110V
Power: 1.80KW
Filling Time: 1L/ 7 minutes
Working Pressure: 100-300BAR; 1500-4500PSI
Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM
Compression Stage : Two Stage
Lubrication Mode : Splash Type
Material of Cover : Cast Aluminum
Inflating Speed: 2800 R/MIN
Noise : MAX 85DB
Cooling System: Water Cooling
Shout down : Manual stop/automatic stop(for optional)
Pressure indicate : Gauge
Filtration : Water/oil separator
Lubricating oil : ISO VG46 or AW 46
Air hose connection : 8mm quick connect fitting
Attention:
1. Make sure the voltage in nameplate meets local powersupply.
2. Double Check the lubricant has been put in before running.
3. Make sure your socket can withstand over 8A electric current, or the circuit may get burnt.
4. Make sure the pressure setting is under 4500psi(310bar).
5. The machine will auto shut off once the pressure reaches 30MPA / 300bar.
6. To keep the cylinder stator temperature in control, please change the cooling water every 30 minutes.
7. Regularly check the engine oil and make sure oil level stays above the red dot; change engine oil if oil color turns.
9. Please make sure to use the ISO VG46 & AW46 standard oil.
10.Before starting the compressor, be sure to replace the breather rod in the kit
Package Content:
Compressor Pump x 1
Hose Female x 1
Air Cock x 1
Water Pump x 1
Wearing Parts x 1
Water Pipe x 2
Pressure Relief Screw x 2
English Manua

UPC: 723496766310