YUCHENGTECH F Type Resistor Forming Machine Manual Axial Lead Bend Cut & Form Machine for Resistor Assortment Kit (F Type)

$219.00

If you have any question, please feel free to contact us, we will try our best to help you. Description: F Type Resistor Forming machine suitable for resistor assortment kit.The lead length and span can be adjusted. Cutting and forming can be finished at the same time. Can be fixed on the table for use, with low cost. Parameter: Range of line diameters that can be cut: 0.35-0.8mmSpeed: 40000-60000pcs/HSize: 200 x 180 x 200mm Weight: 11kgPlease refer to picture 5 for the parameters of the formed F-type resistor Note: 1. The U type, the F type and the Straight type are three kinds of different machine.2. When using this machine, please check whether all fastening screws are tightened.3. Cutting gear, forming gear, circular cutting knife and forming sheet are heat treated parts, which should avoid collision with each other to produce fracture.4. The bending gap should be adjusted according to the wire diameter of the component leads, and the standard is not to expose copper.

Description

Brand: YUCHENGTECH

Color: F Type

Features:

  • [F Type Resistor Form] Suitable for resistor assortment kit, cutting and forming can be finished at the same time.
  • [Small Size] Suitable for use in limited spaces, can be fixed on the table for use.
  • [Operation] Manual manipulation, the lead length and span can be adjusted according to your needs.
  • [Capacity] Suitable for mass production, speed: 40000–60000pcs/H.
  • [Scope of Application] Suitable for various resistors, diodes and other electronic components. Specific parameters can refer to the picture 4.

Details: If you have any question, please feel free to contact us, we will try our best to help you.

Description:

F Type Resistor Forming machine suitable for resistor assortment kit.
The lead length and span can be adjusted. 
Cutting and forming can be finished at the same time.
Can be fixed on the table for use, with low cost.

Parameter:

Range of line diameters that can be cut: 0.35-0.8mm
Speed: 40000-60000pcs/H
Size: 200 x 180 x 200mm
Weight: 11kg
Please refer to picture 5 for the parameters of the formed F-type resistor

Note:

1. The U type, the F type and the Straight type are three kinds of different machine.
2. When using this machine, please check whether all fastening screws are tightened.
3. Cutting gear, forming gear, circular cutting knife and forming sheet are heat treated parts, which should avoid collision with each other to produce fracture.
4. The bending gap should be adjusted according to the wire diameter of the component leads, and the standard is not to expose copper.